Multivalue and array functions - Splunk Documentation (2024)

For an overview about the stats and charting functions, seeOverview of SPL2 stats and chart functions.

dataset()

The dataset function aggregates events into arrays of SPL2 field-value objects.See object in Built-in data types.

Usage

You can use this function in the SELECT clause in the from command and with the stats command.

There are three supported syntaxes for the dataset() function:

Different output based on the BY clause used

When you specify a BY clause field, the results are organized by that field. The values in the group by field are included in the array.

However, the output you see depends on whether you use the GROUPBY clause with the from command or the BY clause with the stats command:

• The GROUPBY clause in the from command returns only one field that contains the arrays, unless you specifically add the group by field to the SELECT clause.
• The BY clause in the stats command returns two fields. One field contains the values from the BY clause field and another field contains the arrays.

For an illustration of this behavior, see the examples below that include a BY clause.

Examples

1. Return all fields and values in a single array

You can create a dataset array from all of the fields and values in the search results.

Consider this set of data:

Use the dataset function to create an array from all of the fields and values using the following search:

...| stats dataset()

The results look something like this:

If you don't specify any fields with the dataset function, all of the fields are included in a single dataset array. A single dataset array is also returned if you specify a wildcard with the dataset function, for example: dataset(*).

2. Return specific fields in an array

You can specify multiple fields to populate the dataset arrays.

Consider this set of data:

The following search creates a dataset array with only the values from the department and username fields.

| FROM main SELECT dataset(department, username)

The results look something like this:

3. Use a BY clause to create separate arrays

You can use a BY clause to organize the search results into separate dataset arrays.

Consider this set of data, which is the same set of data in the previous example:

The following search organizes the dataset arrays by department. Each dataset array contains the user ID and username. The AS keyword is used to rename the output field employees. Otherwise the output field would be named dataset(uid, username).

| FROM main GROUP BY department SELECT dataset(uid, username) AS employees

Because this search uses the from command, the GROUP BY clause is used before the SELECT clause. If you use this function with the stats command, you would specify the BY clause.

The results look something like this:

Notice that the GROUP BY field is not returned in the output. To return the GROUP BY field, you must include that field in the SELECT clause.

4. BY clause output differences

The previous example shows the output using the from command GROUPBY clause when you specify a set of field names with the dataset function.

The following search uses the from command GROUPBY clause and returns all of the fields:

| FROM main GROUP BY department SELECT dataset() AS employees

The results look like this:

Here is a similar search using the stats command:

| FROM main | stats dataset() BY department AS employees

The results look like this:

The stats command returns two fields, the BY clause field department and the employees field.

Notice that the group by field, department, is included in the arrays with both the GROUP BY clause in the from command and the BY clause in the stats command. You can remove the group by field from the arrays by using the dataset_nogrouby() syntax, described in the next example.

5. Using the dataset_nogroupby() syntax

The previous example shows the output using a BY clause in the search, with both the from and the stats commands. The group by field appears in the arrays. To remove the group by field from the arrays, use the dataset_nogroupby() syntax.

The following search uses the from command with the dataset_nogroupby() syntax:

| FROM main GROUP BY department SELECT dataset_nogroupby() AS employees

The results look like this:

The search returns a set of arrays, but there is no way to determine what the group arrays belong to.

However, when you include the group by field in the SELECT clause or use the stats command with dataset_nogroupby() syntax the group by information is returned n a separate field.

For example, the following two searches return the same results:

| FROM main GROUP BY department SELECT department, dataset_nogroupby() AS employees

| FROM main | stats dataset_nogroupby() BY department AS employees

The results look like this:

list(<value>)

The list function returns a multivalue entry from the values in a field. The order of the values reflects the order of the events.

Usage

You can use this function with the stats, streamstats, and timechart commands.

• If more than 100 values are in the field, only the first 100 are returned.
• This function processes field values as strings.

Example

To illustrate what the list function does, let's start by generating a few simple results.

1. Use the from and streamstats commands to generate a set of 11 results that are simply timestamps and a count of the results, which are used as row numbers. Empty arrays with the from command generate the timestamps.

   | from [{},{},{},{},{},{},{},{},{},{},{}] | streamstats count AS rowNumber

   There are 11 results. Th first few results look something like this:

   _time	rowNumber
   2019-10-10T07:19:02.000-07:00	1
   2019-10-10T07:19:02.000-07:00	2
   2019-10-10T07:19:02.000-07:00	3
   2019-10-10T07:19:02.000-07:00	4
   2019-10-10T07:19:02.000-07:00	5

   Notice that each result appears on a separate row, with a line between each row.

2. Add the stats command with the list function to the search. The numbers are returned in ascending order in a single, multivalue result.

   | from [{},{},{},{},{},{},{},{},{},{},{}] | streamstats count AS rowNumber | stats list(rowNumber) AS numbers

   The results look something like this:

   numbers
   1 2 3 4 5 6 7 8 9 10 11

   Notice that this is a single result with multiple values. There are no lines between each value.

3. Compare this result with the results returned by the values function.

pivot(<key>,<value>)

The pivot function aggregates the values in a field and returns the results as an object. See object in the list of built-in data types.

Usage

The <key> argument can be a single field or a string template, which can reference multiple fields.

The <value> argument must be an aggregate, such as count() or sum().

You can use this function with the SELECT clause in the from command, or with the stats command.

Examples

Using the pivot function

Consider the following data that's in the main dataset:

status	host
200	www1
200	www2
200	www1
400	www2
400	www1
400	www3
403	www2
404	www2

Use the pivot function to create an object that summarizes the HTTP status values for each separate host. The search looks like this:

FROM main GROUP BY host SELECT host, pivot(status, count())

The results look something like this:

host	pivot(status,count())
www1	{"200":2,"400":1}
www2	{"200":1,"400":1,"403":1,"404":1}
www3	{"400":1}

You can use the pivot function with the stats command to accomplish the same results:

FROM main | stats pivot(status,count()) as pivotStatus by host

In this search the output field, pivot(status,count()), is renamed using the AS clause.

This search returns the same results as the previous search and looks something like this:

host	pivotStatus
www1	{"200":2,"400":1}
www2	{"200":1,"400":1,"403":1,"404":1}
www3	{"400":1}

Creating nested objects with the pivot function

You can use nested pivot functions to create nested objects.

Consider the following data:

status	host	action
200	www1	purchase
200	www2	purchase
200	www1	addtocart
200	www2	purchase
400	www1	addtocart
400	www1	purchase
403	www2	changequantity
404	www1	view
404	www3	purchase
404	www2	changequantity
404	www1	purchase

You can use one pivot function as the <value> argument in another pivot function to create nested objects:

FROM main GROUP BY status SELECT status, pivot(host, pivot(action, count())) AS nestedPivot

The results look something like this:

status	nestedPivot
200	{"www1":{"addtocart":1,"purchase":1},"www2":{"purchase":2}}
400	{"www1":{"addtocart":1,"purchase":1}}
403	{"www2":{"changequantity":1}}
404	{"www1":{"purchase":1,"view":1},"www2":{"changequantity":1},"www3":{"purchase":1}}

Using a string template with the pivot function

You can use a string template in the <value> argument of the pivot function.

In this example, the string template contains two template expressions, ${name} and ${city}, which are field names. The entire string template is enclosed in double quotation marks:

SELECT pivot("${name} in ${city}", count()) AS mylist FROM main

Suppose these are the values in the name and city fields:

name	city	date
Claudia	London	2020-04-13
Alex	Berlin	2020-04-19
Wei	Sydney	2020-04-21
Claudia	London	2020-04-30

The results look something like this:

mylist
{"Alex in Berlin":1,"Claudia in London":2,"Wei in Sydney":1}

You can add the flatten command to the search:

SELECT pivot("${name} in ${city}", count()) AS mylist FROM main | flatten mylist

The results look something like this:

Alex in Berlin	Claudia in London	Wei in Sydney	mylist
1	2	1	{"Alex in Berlin":1,"Claudia in London":2,"Wei in Sydney":1}

unpivot(<key>,<value>)

The unpivot function transposes search results into an array of one or more objects.

Usage

Use the <key> and <value> parameters to label the values in the objects. These parameters must be strings.

You can use this function in the SELECT clause in the from command and with the stats command.

Examples

1. Unpivot columnar search results

The following search results show the sum of the values in the bytes field for each host:

The following search uses the unpivot function to transpose the results into an array:

... | stats unpivot("field", "value") by host

The results look like this:

If you don't specify a BY clause, the results look like this:

2. Unpivot arrays

The following search results, in the $pivot view, contain a set of arrays with a count of the HTTP status codes organized by action:

The following search uses the unpivot function to transpose the $pivot view results:

FROM $pivot GROUPBY action SELECT action, unpivot("Stats", "Values") AS AggregationSummary

The results look like this:

values(<value>)

The values function returns a list of the distinct values in a field as a multivalue entry.

Usage

You can use this function with the stats, streamstats, and timechart commands.

• By default there is no limit to the number of values returned.
• This function processes field values as strings.

The order of the values is lexicographical.

Lexicographical order sorts items based on the values used to encode the items in computer memory. In Splunk software, this is almost always UTF-8 encoding, which is a superset of ASCII.

• Numbers are sorted before letters. Numbers are sorted based on the first digit. For example, the numbers 10, 9, 70, 100 are sorted lexicographically as 10, 100, 70, 9.
• Uppercase letters are sorted before lowercase letters.
• Symbols are not standard. Some symbols are sorted before numeric values. Other symbols are sorted before or after letters.

Example

To illustrate what the values function does, let's start by generating a few simple results.

1. Use the from and streamstats commands to generate a set of 11 results that are simply timestamps and a count of the results, which are used as row numbers. Empty arrays with the from command generate the timestamps.

   | from [{},{},{},{},{},{},{},{},{},{},{}] | streamstats count AS rowNumber

   There are 11 results. Th first few results look something like this:

   _time	rowNumber
   2019-10-10T07:19:02.000-07:00	1
   2019-10-10T07:19:02.000-07:00	2
   2019-10-10T07:19:02.000-07:00	3
   2019-10-10T07:19:02.000-07:00	4
   2019-10-10T07:19:02.000-07:00	5

   Notice that each result appears on a separate row, with a line between each row.

2. Add the stats command with thevalues function the the search. The results are returned in lexicographical order.

   | from [{},{},{},{},{},{},{},{},{},{},{}] | streamstats count AS rowNumber | stats values(rowNumber) AS numbers

   The results look something like this:

   numbers
   1 10 11 2 3 4 5 6 7 8 9

   Notice that this is a single result with multiple values. There are no lines between each value.

3. Compare these results with the results returned by the list function.

See also

Function information

Overview of SPL2 stats and chart functions

Quick Reference for SPL2 Stats and Charting Functions

Naming function arguments in the SPL2 Search Manual

Evaluation functions for JSON and multivalue data

JSON functions

Multivalue eval functions